Home > Event Id > Event Id 1058 Windows Cannot Access Gpt.ini

Event Id 1058 Windows Cannot Access Gpt.ini

See ME260930 for information related to this post. I changed the order of the NICs and issued a gpupdate /force command. On the folder of the faulting GPO, right click and select Properties. See WITP82658, ME555040, and the link to "Deployment considerations for Group Policy" for details. Source

Having trouble reading this image? In the above error it does give a fix but I am hesitate to try since this is a production DC.For the Event ID 1058 error it is pointing to this This has solved my problem. I checked the C:\windows\SYSVOL\sysvol\\scripts folder, which did not have read rights for the "Everyone" group.

See ME830676 for more details. x 1 Tobias Punke I had this problem when I deactivated the DNS Client service but it was not fixed by simply restarting the DNS Client. The server has two NICs, one of which is disabled. x 4 Richard Righart van Gelder This error started on Monday after rebooting our SBS2003 server.

x 1 Rolf A. Re-initialize CSC cache as explained in Method 1 at ME230738. (Note that performing this step without killing mobsync did not have any effect). 5. This kind of procedure is typically performed by the original equipment manufacturer (OEM) in a production environment where multiple installations of Windows Small Business Server 2003 are performed". Login as a Domain Admin.

The problem for us turned out to be Symantec EndPoint Security. The fix was to unfreeze the forest configuration using the "rendom /end" command, and re-run the gpfixup tool that comes with it. We were recently working on a project with my team to move and migrate several 2008R2 virtual machines from 2008R2 SP1 Hyper-V Host to the l... https://support.microsoft.com/en-us/kb/842804 After that, everything worked.

x 1 Klaus Charlier The events 1030 and 1058 occurred on Windows XP clients trying to logon to a Windows 2000 single PDC. View this "Best Answer" in the replies below » 8 Replies Pure Capsaicin OP Best Answer Martin9700 Jun 9, 2009 at 5:57 UTC Hate to say that I've Once enabled, the problem was gone. Unknown Says: June 3, 2016 at 12:17 PM Hi all,We had the same problem, but we using PowerShell a lot and MS build in the command In your example you need

I tried "DSFUTIL / PurgeMupCache" to solve this problem but it did not help. http://www.darylhunter.me/blog/2011/06/solved-group-policy-gptini-event-id-1058-1030.html x 111 Anonymous In my case, I found that the sysvol subfolder {TD1415- etc} had been renamed. I am not sure if this is related but I am also seeing a File Replication error Event ID 13568 on the Primary DC saying: The File Replication Service has detected that Checked the following Registry values (two of them were not present): HKLM\System\CurrentControlSet\Services\Mup\DisableDFS=0 HKLM\Software\Policies\Microsoft\Windows\NetCache\Enabled=1 HKLM\Software\Microsoft\Windows\CurrentVersion\NetCache\Enabled=1. 3.

Here are 2 of them: - {31B2F340-016D-11D2-945F-00C04FB984F9} - The domain default group policy - {6AC1786C-016F-11D2-945F-00C04fB984F9} - The "Domain controllers" default group policy * * * Reported errors: Error "Access denied" - this contact form So, why the error 5? (Error code 5) Smelled like a permission issue, even though my administrator account could handle it. x 6 EventID.Net See ME842804 for a hotfix applicable to Microsoft Windows 2000 and Microsoft Windows Server 2003. NOTE: The \\Active Directory Domain Name\Sysvol share is a special share that requires the DFS client to make a connection." See ME314494.

The error stopped within five minutes on the DCs. I recreated it and the errors went away after a gpupdate /force. But, from domain joined servers/computers, it was a no go.  I could get to \\server\sysvol\domain but it was empty.  Same with \\domain\sysvol\domain - empty. have a peek here Reboot the system as directed.

Re-binding them caused the errors to stop. from the command line. x 121 Rick Passero Userenv errors 1058 and 1030 have occurred on one of our two Windows 2003 domain controllers, twice now.

x 111 Anonymous I had the same errors (1058 and 1030 every five minutes) and the ipconfig /registerdns command worked for me.

You can also extract it directly from the \\SUPPORT\TOOLS\SUPPORT.CAB cabinet file. Post another comment The letters and numbers you entered did not match the image. I solved the problem by allowing NetBIOS traffic through the VPN tunnel. By clearing the inconsistency problems in the GPO between SYSVOL and Active Directory with the Group Policy Management Console, events 1058 and 1030 were also cleared on all Servers and Clients

The clients were then able to process GPO updates again. x 3 Paul Lockyer On a couple of multi-homed machines that I was working on I found this problem to be caused by the fact that "File and Printer Sharing" was I did not follow steps 1c-f of ME290647 for Windows 2003 servers, which describe removing inheritance from parent folder on two subfolders. Check This Out Once again, gpupdate /force.

Since this was an Access denied error, I paid particular attention to step 5 and permissions on the sysvol folder and subfolders. Make sure your internal interface with all proper bindings needed for resolution is the first in the network access order list "Network Connections >Advanced>Advanced Settings>Adapters and Bindings". Look forward to checking out your web page for a second time. The Enterprise Domain Controllers group must have read access on all GPOs in the domain in order for Group Policy Modeling to function properly.

I removed the lingering entries for the old server from DNS and restarted the DNS service. One symptom of this is that you do not have access to the drives of non-domain controllers when you browse the network from some domain controllers. Even though they seemed to be registered properly, the errors came every five minutes until I eliminated all but one IP for the internal NIC. x 74 Anonymous We have two Domain Controllers and we received 1030\1058 errors every 5 minutes on our primary DC as many people have.

The Access Protection Default rule set prevents remote creation of .ini files and other extensions, thus, the GPO files cannot be updated. I could view \\dcname\anyothershare but not \\dcname\sysvol. I run Replmon and it says replication is working fine but I don't think so.Has anyone seen this issue before and might know the cause and resolution other than what the Then list the IP address for each domain controller in your domain, on the same hosts file (with the domain name next to it).

x 3 Scott Truman I had this problem on a multihomed 2003 server when I removed ''unwanted'' bindings and TCP/IP settings” (Client for Microsoft Networks, File and Printer sharing, netbios, etc) Install UPHClean.