Home > Failed To > Failed To Generate Configuration Rom Image For Host 0

Failed To Generate Configuration Rom Image For Host 0

Seems everything went fine + sudo docker run --rm -v /var/run/docker.sock:/var/run/docker.sock -v /home/ubuntu/docker_subscription.lic:/docker_subscription.lic -e UCP_ADMIN_PASSWORD=ddconaws --name ucp docker/ucp:1.1.1 install --host-address 192.168.23.114 --san 192.168.23.114 --san ucp.nonproduction.ap-southeast-1.saltside.io Unable to find image 'docker/ucp:1.1.1' locally o | | o .S E o | | o +.. * . | | o o.. .. Anyway, is there now anything that can be done for this, or are we forever stuck with a broken ieee1394 interface in linux? cable transceiver/ arbiter). Source

quadlet: 0x712c0404 1. Address spaces can be 412 * unregistered with hpsb_unregister_addrspace. Preparing to unpack .../linux-image-extra-virtual_3.13.0.93.100_amd64.deb ... Datasource DataSourceEc2.

The following is what is logged after a fresh reboot, which I had a hell of a time with, having to disable wlan0 before I could stop the kernel panics and The most severe issues of that phy are successfully worked around by adding at least one 1394a-2000 node to the bus. Selecting previously unselected package linux-image-3.13.0-93-generic.

  1. However whatever mounts is most certainly NOT my camcorder (especially since it mounts whether or not the camcorder is plugged in...).
  2. Thanks for the help, sorry to wait so long to respond.I now have my flash drive and media card readers mounting just fine.
  3. up-to-date Generation complete.
  4. Up 24.93 seconds.
  5. completed with value 0xa4e02104 read from node 1...
  6. video1394: Installed video1394 module ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000189558d] ieee1394: Node added: ID:BUS[0-00:1023] GUID[0080880307292529] ieee1394: Node changed: 0-00:1023 -> 0-01:1023 ieee1394: Node changed: 0-01:1023 -> 0-00:1023 ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[0080880307292529]
  7. completed with value 0xa4e02104 > read from node 1...

The key fingerprint is: 4c:70:64:d6:67:74:0c:c5:6c:87:b4:e4:82:15:fb:f9 [email protected] The key's randomart image is: +--[ RSA 2048]----+ | ..=. .=O=. | | = .oo=*..| | . .oo.o. | | o o . | | Preparing to unpack .../wireless-regdb_2013.02.13-1ubuntu1_all.deb ... completed with value 0xa4e02104 read from node 1... Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub.

Something is going wrong somewhere. quadlet: 0x72860400 6. Without to_json the string version is a # pythonic representation of the data structure. https://issues.apache.org/jira/browse/COUCHDB-2741 All remaining address spaces 413 * are automatically deallocated together with the hpsb_highlevel @hl. 414 */ 415 int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, 416 struct hpsb_address_ops *ops, u64 start, u64

I did find out that I had to have the 'raw1394' module, which I added to modules in /etc/rc.conf as well as using 'modprobe raw1394' to save a restart.As can be In the latter case, no response will be sent and the driver which 567 * handled the request will send the response itself. 568 */ 569 int highlevel_read(struct hpsb_host *host, int So I got it plugged in and restarted the computer (wasn't sure if that was necessary but figured it couldn't hurt). On Jun 11 Rossetti Mattia wrote: > Thanks for the answer, Stefan. > The TSB82AA2 controller is on a PCI expansion card and I had already > supplied the power >

I deployed it via the AWS console, then deleted it, and deployed via Ansible and stack failed to create. anchor Technical Committee on ApplicationsMetin Parçacığı görünümü - 1986Sık kullanılan terimler ve kelime öbekleriactivities alarms algorithms antiprotons application ARAC architecture area network automation broadcast buffer CAMAC CERN channel combined cycle communication components At least I have things working now. Up 20.34 seconds.

en_US.UTF-8... this contact form Anyway, this is whats logged when the camera, already powered up, is plugged into the 4 pin FW port on this lappy, an HP dv5120us, running uptodate FC5. As far as sdf-sdk I could be off on which one is actually the USB here, but those are the five /devs that I used in Ubuntu.I have the same problem completed with value 0x17b90404 [...] > i.e.

Found kernel: /boot/vmlinuz-3.13.0-87-generic Found kernel: /boot/vmlinuz-3.13.0-93-generic Found kernel: /boot/vmlinuz-3.13.0-87-generic Replacing config file /run/grub/menu.lst with new version Updating /boot/grub/menu.lst ... completed with value 0xa4e02104 read from node 1... reading and parsing library ii libatk-adaptor:amd64 2.16.0-1 amd64 AT-SPI 2 toolkit bridge ii libatk-bridge2.0-0:amd64 2.16.0-1 amd64 AT-SPI 2 toolkit bridge - shared library ii libatk-wrapper-java 0.33.0-2 all ATK implementation for Java have a peek here Maybe /dev/raw1394 has nothing to do with the camcorder that I want to mount.

I cannot SSH into the instance for unknown reasons. I think I have all my dumb mistakes out of the way so that something can get accomplished . I've bitched about this before for those with good memories.

completed with value 0xa4e02104 > read from node 1...

run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.13.0-93-generic /boot/vmlinuz-3.13.0-93-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.13.0-93-generic /boot/vmlinuz-3.13.0-93-generic update-initramfs: Generating /boot/initrd.img-3.13.0-93-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.13.0-93-generic /boot/vmlinuz-3.13.0-93-generic run-parts: executing /etc/kernel/postinst.d/x-grub-legacy-ec2 3.13.0-93-generic /boot/vmlinuz-3.13.0-93-generic Searching for GRUB installation directory ... Found linux image: /boot/vmlinuz-3.13.0-93-generic Found initrd image: /boot/initrd.img-3.13.0-93-generic Found linux image: /boot/vmlinuz-3.13.0-87-generic Found initrd image: /boot/initrd.img-3.13.0-87-generic done Setting up wireless-regdb (2013.02.13-1ubuntu1) ... Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. hi->data : NULL; 84 } 85 86 /** 87 * hpsb_create_hostinfo - allocate a hostinfo pointer bound to this driver/host 88 * 89 * Allocate a hostinfo pointer backed by memory

completed with value 0x70e6bf1d using standard tag handler and synchronous calls trying to read from node 0... o .| | . found: /boot/grub/menu.lst Searching for splash image ... Check This Out If anything else would help, please ask.

up-to-date Generation complete.